Each set: 2kg

Unit: group

Viscosity of agent A: 10000~15000cps

External view: transparent liquid body

Viscosity of Agent B: 8000-10000cps

External view: transparent liquid body

Combination ratio: A 1: B1 (weight ratio)

The main uses:

Substitute wood bonding, repair, filling, metal, plastic, etc

The chief executive:

High strength, impact resistance, toughness

Operation time: 1 hour (100g×25℃)

Initial hardening time: 4 hours

Complete hardening time: 24 hours

Compression strength: 280 -- 300 (㎏/㎝2)

Then strength: 85 (㎏/㎝2)

Bending strength: 112 (㎏/㎝2)

Heat resistance: 100℃

Hardness: 80 (SHORED)

First, use method:

1. Mix 1 part of agent A and 1 part of agent B and stir well.

2. Apply the AB mixture evenly to the bonding surface.

3. Coated adhesive items should be prohibited from shifting or moving within at least 1 hour, otherwise it will seriously affect the bonding effect.

4. Coated adhesive items should be at least 16 hours before normal use and all kinds of tests, otherwise its curing effect and bonding life and test data will be affected.

Ii. Precautions:

1. Both A and B should be stored in a cool place.

2. If A and B are mixed in large quantities, it will cure rapidly. Special care should be taken and appropriate amount of glue should be deployed.

3. After use, if the skin is stained with this agent, wash with soap.

4. Mixing tools or containers should not be mixed to avoid shortening the service life of agent A